home-Science and technology-Sagemcom router: step-by-step setup for a kettle. Technical support service for users of the Kaluga branch of Rostelecom PJSC Connecting the f st 2804 v7 router

Sagemcom router: step-by-step setup for a kettle. Technical support service for users of the Kaluga branch of Rostelecom PJSC Connecting the f st 2804 v7 router

This router is well known to people who use the services of the Rostelecom operator, because it is this company that issues SAGEMCOM F@ST 2804 v7 to its users. The device has a good signal and stable operation, it has a nice design, enviable characteristics and wide functionality. An important advantage is the presence of USB ports, using which you can activate a 3G modem and create a backup channel.

Users have the opportunity to connect a 3G modem to the router

Let's take a closer look at how to configure the SAGEMCOM F@ST 2804 v7!

  • high CPU power of the router;
  • IPTV;
  • filtering by MAC address;
  • compatibility with various devices;
  • support for multiple IP services;
  • when connecting a telephone to the wire, the line remains free;
  • Rostelecom provides technical support;
  • shockproof housing;
  • 300 Mbit/s;
  • When problems occur, communication channels are switched automatically.

The equipment can be controlled remotely, this was made possible thanks to the TR-069 client. The device from SAGEMCOM also supports modern IP services: DHCP, DNS, IPv6, IGMP, IP routing (full speed).

Firmware

To make the SAGEMCOM F@ST 2804 v7 router work better, you can flash it to the latest version. In the “Device Information” section you will find out the current software version.

You can find the latest firmware on the website of the developer company.

After downloading the firmware to your PC, you can begin installation. This is done in the “Software Update” item of the “Management” section. Click on “Select file” and enter the path to the program. Now all that remains is to click on “Update”.

The firmware process will take some time, but you should not turn off or reboot the equipment. After the procedure, the product will perform a reboot on its own.

Internet

There are no particular problems when configuring SAGEMCOM F@ST 2804 v7 from Rostelecom. All manipulations are performed through the interface. First, we recommend that you register the route “192.168.1.1” and enter authorization data. For a new product, enter the keyword admin in both fields, and if no changes occur, then click reset.

So, the setup begins with creating a PVC connection. Find the item “ATM PVC Interface”. Having done this, click on “Add” and set the following parameters:

  • VPI/VCI - 0/33;
  • Encapsulation mode - LLC;
  • DSL Link type - EoA.

Then add a connection through the “WAN service” (click on “Add” in this window). It is recommended to set the physical interface to the atm0 position.

Interestingly, the network here can be selected as “Bridge” or “Router”. The system will prompt you to make this choice during setup.

When using a PPPoE connection, enter the following data in the fields provided:

  • login/pass - enter the data provided in the agreement;
  • To avoid repeating PPP authentication in case of an error, check the box next to this item;
  • service name - come up with a name for your network;
  • auto authentication.

Also enable Firewall and NAT (these fields may be missing in some firmwares). There is no need to touch other fields, click “Apply”.

Now re-enter the login/pass of the router issued by the company into the “Internet Connection”, and then reboot the device to get started.

Wi-Fi setup

Wi-Fi on the SAGEMCOM F@ST 2804 v7 from Rostelecom is configured very quickly. Select “Enable Wi-Fi” in the “WLAN Settings” item, and enter the following in the “Security” section:

  • WPS - Disable;
  • type - WPA2-PSK;
  • SSID - enter the name of the network;
  • encryption - AES;
  • password - come up with a reliable key.

Appearance of Sagemcom F@st 2804



1. Connection

You need to connect the POWERNET cable to LAN port 1 (Ethernet0) of the router and connect the computer to LAN port 2 (Ethernet1) of the router.


2. Configuring the Ethernet port as a WAN port, enabling IPTV

You need to go to the web interface of the router (192.168.1.1, login/password - admin/admin). Next, go to “Advanced settings” - “WAN service”. Delete all WAN services (select the checkboxes and click “Delete”).



Go to "Additional settings" - "2nd level interface". Delete all interfaces that exist here.



Go to "ETH interface", delete interface Eth0.



Click "Add". Select port eth0/eth0 as the WAN port.



Go to "WAN service", select eth0/eth0, click "Next".



WAN service type: “IP over Ethernet”, click “Next”.





Select "Enable NAT" and "Enable IGMP Multicast" (required for IPTV to work).



We add the Eth0.1 interface to the list of default gateways. It is advisable to delete others (move them to the list on the right).



We do the same with the DNS server interface.



End screen.





3. Setting up a Wi-Fi connection, changing the Wi-Fi password.

Go to the "WLAN Settings" menu. In the SSID field, write the name for the wireless network.



Go to the menu "WLAN Settings" - "Security", scroll down the page. Select the SSID entered on the Wi-Fi setup page, encryption type Mixed WPA2/WPA – PSK. In the WPA/WAPI field you can enter the password for the router. IMPORTANT: the router already has a Wi-Fi password, it is written on a sticker on the bottom of the router, you do not need to change it.



4. Changing the administrator password on the router.

Go to "Management" - "Access Control". Change passwords for accounts.


This article is dedicated to the Sagemcom f@st 2804 device. In the recent past, Rostelecom and MTS began to actively promote it. The latter supplies it under the name “MTS Universal Router”.

Upon closer examination, it turns out that this device combines the functions of a 3G, ADSL, and Ethernet router. In addition, it can work as a wi-fi access point that supports 802.11 n/g/b. Additional bonus: supported IPTV. The router's equipment is not very rich, but, nevertheless, everything you need is there.

Please note that MTS offers two models that differ in appearance and software (V1 and V3). The latest firmware versions of the MTS universal router allow you to connect more than 13 modem models to it.

By the way, you can download the latest version of the software, installation and recovery instructions on the official website.

Rostelecom offers a V7 version of the device. But their website, unfortunately, cannot boast of the presence of fresh software. There is only a brief specification of the device universal router f st 2804, and instructions.

The router, manufactured by Sagemcom, allows you to connect to the Internet via a high-speed connection.

The most notable characteristics of this router:

  1. high-speed connection via telephone cable, while the telephone itself is free;
  2. support for IPTV transmission to digital set-top box;
  3. accessing and managing multimedia content.

The device is equipped with a modern, powerful processor that allows you to connect to the Internet at maximum speed, in addition, it is possible to view several high-definition IPTV channels at the same time.

Wireless device interface router fast 2804 V7

The Sagemcom router supports the 801.11b/g/n WFA specification. It also has a 2x2 transmit/receive configuration, thanks to which the actual connection speed reaches 80 Mbps. The following modern security protocols are supported: MAC address filtering, WPA, WPA2, WEP. The router is equipped with a function for automatic selection of a radio channel and a separate button, which provides convenience and simplicity of wireless connection according to the WPS protocol. There is an additional button on the case that turns on the wireless interface.

Multimedia content

The device is capable of operating as a DLNA server version 1.5, supporting the Webdav, Samba, UPnP protocols, which allows access to multimedia content from any device. There are two USB ports through which access to a printer or external storage can be provided.

Router functions

The router supports a large number of IP services applicable to double-play routers:

  • IGMP proxy/snooping
  • DNS dynamic/server/relay
  • DHCP relay/server/client
  • Full speed IP routing

Firewall

The 2804 v7 router has a firewall with the following functions:

  • Complete address/protocol filtering/port
  • Stateful Packet Inspection

Configuring traffic through the application firewall:

  • VoIP services based on H.323 and SIP
  • a large number of WEB applications

Connection using the example of a device from MTS

Router 2804 makes it possible to implement a broadband Internet connection in an office or home network through channel reservation:

  • 3G modem, Wimax, Fon;
  • on PC and TV IP television;
  • wireless Wi Fi connection (802.11 n\b\g)

The modem is connected in the following order. We connect the cable to the RJ-11 connector via a splitter. The universal router is connected to the computer via an Ethernet cable; for this purpose, there are four connectors on the back of the router. The external modem is connected to the USB port, then the router itself is connected to the network.

An external modem can be used to reserve an Internet channel. If the main channel is interrupted, the device will automatically switch to a connection via an external modem.

Setting up the router

Having established an Ethernet connection, open the browser and enter the IP address of the device. The default address is set to: 192.168.1.1. After this, the system will require authorization. We enter your username and password, or leave the default one, then in the window that opens all the settings necessary for working with the Internet appear: universal router settings, connection parameters, channel configuration, wireless connection.

A separate tab provides advanced configuration of the f st 2804 router, which is required for experienced users. Once you enter and save the required data, the connection setup is complete.

It was mentioned above about the possible reservation of a channel for those cases when the main connection is lost. This is done in the following tab: “3G channel configuration”. We put a tick in the inclusion point, and after 15 seconds. the device will automatically switch to the connection via the backup channel. When the main connection is restored, the router will automatically switch back.

Setting up a wireless connection, the basic parameters contain: enabling the WLAN module, the function of not detecting an access point, the Mac address of the wireless connection, network authentication and selecting the channel through which the router communicates with clients.

In the “Management” tab, you can back up setup data, update or restore the system. After updating the device software, the previously used settings are retained. The update takes place in a couple of minutes.

Let's summarize the above

The fast 2804 universal router is quite large, but working with it is very simple. The functionality of the device is high, it is possible to implement all the necessary resources, including backup switching from the main connection to an additional one. Everything described gives reason to believe that a universal router from Sagemcom will be one of the most convenient options for implementing office or home communications.

Increase

Download: Automatic configuration and firmware update/recovery program

Download: Product technical presentation

Specifically designed for the retail and SOHO markets, the F@st2804, v7 router provides
broadband Internet access via a high-speed connection. Purchasing a router
F@st2804, v7 the user receives the following benefits:

. High-speed connection via telephone cable, while the phone remains free
. Transferring high-definition IPTV content to a digital set-top box
. Providing access and managing multimedia content

BRANDING AND CONFIGURATION UNDER THE LEADING RUSSIAN OPERATOR OJSC ROSTELECOM
The F@st2804, v7 router is branded and fully optimized for the network of the leading Russian operator OJSC Rostelecom. The auto-configuration wizard included in the package contains network configurations for all regions and branches of the operator, and all you need to do to configure the router is select your region during installation.

HIGH SPEED CONNECTION
The F@st2804, v7 router has a modern powerful central processor that
allows you to access the Internet at maximum speed, and also makes
It is possible to view several high-definition IPTV channels simultaneously.

MODERN WIRELESS INTERFACE
The F@st2804, v7 router is compatible with the 802.11b/g/n WFA specification and has the configuration
transmitting and receiving part “2x2” - this allows you to obtain connection speeds of up to
300 Mbit/sec. The router supports modern security protocols: WEP, WPA, WPA2,
filtering by MAC addresses. In addition to this, the router has an automatic
radio channel selection and a separate button with indicator providing maximum
simplicity and convenience of connecting wireless devices using the WPS protocol. Also a router
has an additional button on the body for convenient activation of the wireless interface.

ACCESS TO MULTIMEDIA CONTENT
To provide access to multimedia content through any device and at any time
time, router F@st2804, v7 can work as a DLNA server version 1.5,
supporting Samba, Webdav and UPnP protocols for transmitting multimedia content
(photo, video, music) over a local network. The presence of two USB 2.0 Host connectors allows
provide public access to an external USB drive, as well as a USB printer.

FULL IP ROUTER
F@st2804, v7 supports most modern IP services applicable to double-play
to routers:
. IPv6
. Full speed IP routing
. RIP V2/V3, IGMP proxy/snooping
. DHCP server/relay/client
. DNS server/relay, Dynamic DNS

REMOTE CONTROL
The built-in client TR-069 allows the Operator to exercise full control and
setting up the router on the user's side remotely. Also for this task there may be
Standard means were also used: HTTP, FTP upgrade.

NAT and FIREWALL
F@st2804, v7 contains a firewall with the following functions:
. Stateful Packet Inspection
. Complete address/port/protocol filtering
It is possible to configure the passage of traffic through the firewall and NAT for the following
applications:
. VPN: PPTP or IPSec
. VoIP services based on SIP and H.323
. Most popular WEB applications

EASY INSTALLATION AND CONFIGURATION
The CD included with the F@st2804, v7 router contains an automatic
settings, which configures the router in a fully automatic mode.
The visual interface of the wizard is so simple and clear that anyone can use it
even a child. The wizard also contains a diagnostic function that allows you to quickly
solve problems that arise, and, if necessary, provide the necessary
information for the Operator's technical support service.

ALWAYS CONNECTED
Using an external 3G USB modem, the F@st2804, v7 router is able to provide uninterrupted access to the Internet.
When the main channel (ADSL or WAN ETH) becomes unavailable, the router automatically switches to the backup 3G channel.

Related publications: